T-Mobile (USA)

[creddtx]

These are the settings that work for me.

MMSC: http://216.155.174.84/servlets/mms

Proxy: 216.155.165.50:8080

APN: wap.voicestream.com

Username and Password are left blank

Good luck
Roger

Thanks roger, works perfect...1st time outta the box...now i can get my girlfriends 'pics'

[courtstarr24]

my MMS worked fine for a few days and all of a sudden it just quit on me. i get a message that says "failed to send MMS. the network reported: sending address unresolved (pe)"

i double and triple checked all my settings. im using a 2g iphone unlocked/jailbroken on tmobile with a full internet plan and t-zones. on firmware 2.0 i searched the error message in the forum but got zero results. anybody else get this? anybody know of a fix?

[iPhone247]

I'm on T-mobile and it works fine for me. I have an iPhone 3G. The firmware my phone is on is 2.0.

[reznor9]

my MMS worked fine for a few days and all of a sudden it just quit on me. i get a message that says "failed to send MMS. the network reported: sending address unresolved (pe)"

i double and triple checked all my settings. im using a 2g iphone unlocked/jailbroken on tmobile with a full internet plan and t-zones. on firmware 2.0 i searched the error message in the forum but got zero results. anybody else get this? anybody know of a fix?

I just recieved the exact same error... it was working perfectly on my 3G before I updated to the latest Swirly MMS. Tried it on my moms 2G iPhone and she is getting the same error. Whats up with that? We are both on 2.1fw

[jamesoja]

I had SwirlyMMS working earlier this morning on my JB 3G, 2.1 w/Tzones. Now no luck, please post updated settings.

Thank You!

[needSMS]

Having trouble getting swirlyMMS working.

I use t-Mobile and have had a subscription to the messaging service for 3 years. I downloaded the application to my phone via Cydia and configured it for T-Mobile via all the correct settings that are posted all over these forums. My phone is on firmware version 2.0.1.

Whenever I try to obtain a demo license I get message that says it Failed. I've installed the application twice.
I presume the software will not work until I at least have a demo license, but I've tried sending messages anyways both to myself and to other numbers.
Here is the error message I get when I attempt this:

Failed to send MMS
Possible incorrect mmsc setting
Unexpected http response
(HTTP/1.1 502 Next Hop Connection Failed)
-also-
Failed to send MMS
failed to POST: timeout or error when reading http header

Anyone know a solution or have a useful tip?

After 2 full days of painful troubleshooting, performing numerous uninstalls and re-installs, verifying settings over and over, rebooting my iPhone, reading forums, blah blah blah...
I've finally got SwirlyMMS working on my iPhone! The quote above was my issue to begin with. I originally was doing the install over the T-Mobile Internet service and trying to fetch my license over that connection as well since the speed is reasonable, at least around where I live. Tonight I decided to connect to my home WiFi and try to fetch the Demo license and low and behold, it was successful! I was shocked to say the least. I can now transmit/receive MMS messages via T-MobileWeb (formerly known as TZones). I swear I tried this in the past couple days but who know, with all the steps I performed I can't keep them straight. I should note that the images that I receive are downloaded and resized noticabally smaller, like many other users report and I haven't gotten that figured out yet. Needless to say I'll be moving on to another forum.
I have it configure with the network setting below:

http://216.155.174.84/servlets/MMS
216.155.165.050:8080
wap.voicestream.com
User ID and Password are blank

If you have a WiFi connection available and can't do one of these - either get the software to install, fetch licensing, or tx/rcv messages properly... I recommend attempting via the WiFi connection and see what happens. I will definitely test away with this over my 'free' trial period to see what other bugs it has and if it's worth the whopping $8. Today that's 2 full gallons of gas. Hell, after the trouble I went through, I should be given a license.

*****************************************
UPDATE Since posted:
I got the image to stop being resized to almost unviewable by changing the "UserAgent" setting to Motorola_V630. At that point I could put it on the lowest Image Size setting "Minimum" and it would then still be resized, but to a MUCH better size than what I was originally getting. More along the lines of what it should be (160X120 - almost full screen on iPhone). From there I just moved up to Maximum and my image was the original full screen size that I sent.
****Image resize suggested fix: Look at the UserAgent options, research which model your service provider supports (T-Mobile, Cingular, etc), or find one that is similar if you can, and test with the settings. Or just try them all and test with all settings.

[deteto]

I just set it up and works great. Thank you all for the settings

[white_ninja]

Mine works Great BUT!!!!!!! if your having problems try what i did... i didnt realize i was running 2.0.2 SO I figured out that it didnt work for me with that after days and days of trying and finally i upgraded to 2.1 and right after that worked GREAT!!!

[commodorevic]

Do everything as it's written above, but leave out the "http://"

That's what worked for my iPhone 2G with 2.1 firmware.

[BIG!GFX]

Without the http:// it didn't work for me. After adding it, it worked...sort of. I am on a 1st gen iPhone 2.1 and sending a picture message to my wife's sidekick. She received a message from 333 saying she has a message and to view it she needs to visit http://www.my.tmobile.com and log in. She received this in her text message inbox not her picture message inbox. I then sent a picture message to my phone from hers and I received it with no problem. The picture quality was less than that of her camera phone pic but that was it.