At&T Working Settings Finally!!!!

Here goes the different settings for MMSC, Proxy and APN that have been proven usable.

Re: At&T Working Settings Finally!!!!

Postby gotmjnumberz on 08 Jul 2008, 17:38

okay i get the whole thing that i havchange my imei number and im very confident that i will be able to to that without any problem, but the one question i do have is that i only have an iphone and just recently change to at&t to get an iphone therefore i actually do not have another phone to use its imei number any alternatives to getting an actually imei number to use?

please help...
gotmjnumberz
 
Posts: 1
Joined: 08 Jul 2008, 17:32

Re: At&T Working Settings Finally!!!!

Postby megasunomi on 08 Jul 2008, 19:13

These setting mentioned above show this result when used:
Failed to send MMS
Could not connect to proxy(unable to locate host)


Any one else?
megasunomi
 
Posts: 6
Joined: 07 Jul 2008, 20:45

Re: At&T Working Settings Finally!!!!

Postby mat00311 on 08 Jul 2008, 20:06

Could someone clarify the process to change the imei number? i have ziphone and an old phone i still use on occasion. is this done through the ziphone software as described in the original post, or directly through att? thanks!
mat00311
 
Posts: 1
Joined: 08 Jul 2008, 20:03

Re: At&T Working Settings Finally!!!!

Postby logitech2008 on 08 Jul 2008, 22:35

i have the iphone with cingular i put in these settings and still doesnt work any help someone can give me thanks
logitech2008
 
Posts: 3
Joined: 08 Jul 2008, 21:31

Re: At&T Working Settings Finally!!!!

Postby logitech2008 on 08 Jul 2008, 22:36

i have the iphone with cingular i put in these settings and still doesnt work any help someone can give me thanks
logitech2008
 
Posts: 3
Joined: 08 Jul 2008, 21:31

Re: At&T Working Settings Finally!!!!

Postby Late421 on 09 Jul 2008, 20:11

I have an iphone on at&t, i have mms on my account and active, ive installed swirlymms 1.1, ive changed my IMEI to a RZR9 via ZiPhone, Ive used the given settings for at&t and Im getting this for fetching

"Fetch Error: unexpected http response..."

and i get this when trying to send

"Failed to send MMS
Possible incorrect mmsc setting,
Unexpected http response
(HTTP/1.1 403 Forbidden)"
Late421
 
Posts: 2
Joined: 09 Jul 2008, 19:55

Re: At&T Working Settings Finally!!!!

Postby Late421 on 09 Jul 2008, 23:05

i got it working...if everything is correct for you the same, just go to wireless.att.com do not login...go to EXPLORE in the orange navigation bar at the top....then in the center of the screen choose the link entitled Go To MyMediaNet...complete the steps with your phone number and you'll b sent a text message with a 4 digit number...enter that 4 digit number in the next step on the computer screen and it works....im currently enjoying my SwirlyMMS 1.1 without a flaw......countless calls to AT&T and Tech support and finally one CSP suggested it and it worked....hope it solves you guys' problems as well :D
Late421
 
Posts: 2
Joined: 09 Jul 2008, 19:55

Re: At&T Working Settings Finally!!!!

Postby TEEZ on 10 Jul 2008, 00:17

I do that and this is what it gives me...

"Sorry

The device associated with that wireless number is not supported by MEdia Net. Please try another number, or login to Your Account to upgrade your device."


Not sure what I would need to upgrade....
TEEZ
 
Posts: 1
Joined: 10 Jul 2008, 00:14

Re: At&T Working Settings Finally!!!!

Postby phoenixfire425 on 10 Jul 2008, 16:22

Ok only because i am tired of seeing threads about Swirly not working and the battle of people arguing the point that swirly does not work with AT&T.

Lets put this myth to rest

SWIRLY MMS DOES WORK WITH ATT!

here is how i did it.

To ALL AT&T people.

Here are confirmed working settings on my and several others phones.
BUT you have to get off of the AT&T IPhone plan.
Call ATT and tell them that you switched to your old phone.
i had a Sony W300i. that i told them that i switched to.
(you might also have to download the swirly fake phone patch. I did not have to use this. but on a friends i had to use the W800i patch. you can find this on the swirly repo.)
Turn your phone off After they do the switch.
turn the phone on.
they will ask you if you can get on the media net.
tell them no.
ask them to take you off the network and put you back on the network. they will tell you to power cycle your phone..
after that open safari.
if you can access the web great. (make sure WiFi is off to see if you are going to the ATT AP not your WiFi)

After all of that Download Swirly.
Reboot your Phone.
Set the Settings
and then send/receive your messages!!




use these settings.
_____________________________________________
MMSC: mmsc.cingular.com
Proxy: 066.209.011.032

APN: wap.cingular
Username: (leave Blank)
Password: (leave Blank)

Image size: Medium
_____________________________________________
These work for me.

DOWNFALL:
you loose visual voicemail. (but its worth the loss if you ask me)

the new version is also out..
This includes forwarding, reply, texting, native MMS viewing!! and much more
but it cost $8.
Soon as my trial is up im buying.. but i have to make sure this works on the 3G iphone. on firmware 2.0

If you have any douts that this works then PM me your number and i will send you a MMS.

ALSO i will try to get video of this. later the week. i hope with the 3G IPHONE.
phoenixfire425
 
Posts: 7
Joined: 10 Jul 2008, 16:16

Re: At&T Working Settings Finally!!!!

Postby tommy on 10 Jul 2008, 18:13

phoenixfire425 wrote:Ok only because i am tired of seeing threads about Swirly not working and the battle of people arguing the point that swirly does not work with AT&T.

Lets put this myth to rest

SWIRLY MMS DOES WORK WITH ATT!

here is how i did it. <snipped>


Thanks for sharing - and for your support! :-)
tommy
 
Posts: 76
Joined: 05 Mar 2008, 22:05

PreviousNext

Return to Usable Settings

Who is online

Users browsing this forum: No registered users and 2 guests

cron